Temporary Medical Waste Disposal

Medical Waste Disposal For Sale

Acerca del proyecto

In the process of medical treatment, a large number of medical waste products will be generated, which need to be treated urgently, otherwise it will cause more serious consequences. Therefore, the medical waste will be transported away from the suburb where people live, but the outdoor treatment is likely to cause secondary pollution. In order to avoid this situation, the emergence of temporary medical waste disposal is the best solution.

Recently, Liri Tent received an emergency order for the treatment of medical waste generated by the epidemic. A temporary medical waste disposal site needs to be built and put into use in a short time. Reported by on-site workers, there was still heavy snow during the construction, under such difficult circumstances, the construction met a huge test and various problems. However, it took less than one week to successfully complete the medical waste disposal, once again show the efficiency of prefabricated tent building.

Temporary medical waste disposal adopts aluminum alloy fabricated building structure design, and can expand and increase the space area in the later stage. waterproof PVC, which effectively isolates touch with the outside world. This also brings great confidence and help for controlling the epidemic. Temporary medical waste disposal also meets temporary requirement, after the epidemic situation, there is no need to worry about the dismantled work, the site can be restored immediately. The temporary structure built in a few days and you can also dismantle it in a few days without causing excessive pollution.

Military Tent Series Specifications
Ancho de vanoAltura del aleroAltura de la crestaDistancia entre módulosPerfil principal
3m2.6m3.16m3m100x48x3.0mm (4 - channel)
4m2.6m3.35m3m100x48x3.0mm (4 - channel)
5m2.6m3.52m3m100x48x3.0mm (4 - channel)
6m2.6m3.71m3m100x48x3.0mm (4 - channel)
8m2.6m4.05m3m100x48x3.0mm (4 - channel)
9m2.6m4.24m3m100x48x3.0mm (4 - channel)
10m2.6m4.4m3m100x48x3.0mm (4 - channel)
12m
2.6m4.76m3m100x48x3.0mm (4 - channel)
Características

Perfiles de la estructura: aluminio extruido 6061/T6 (15HW) de alta resistencia

Fabric cover: high quality double PVC-coated polyester textile; 100% waterproof; flame retardant to DIN4102 B1, M2, CFM; UV resistant, tear resistant, self-cleaning ability, etc

Conectores: acero resistente galvanizado en caliente

Rango de temperatura admisible: de -30 °C a +70 °C

Resistencia al viento: máx. 100 km/h

Carga de nieve: 75 kg/m² (la nieve no se acumula con un techo de gran pendiente)

Fácil de montar y desmontar

Sin postes interiores, 100 % del espacio interior disponible

Contenido similar
Comentarios de 3
  1. Need all brouchers and categories

  2. I stumbled on your website while researching for my seminar presentation on medical waste management. I must say, I am impressed with I saw on your web page.
    Thank you.
    Dr. Nnam
    Department of Community Medicine,
    UPTH, Nigeria

  3. Dr. Cemal Kaldirimci 2022-03-25 en 22:56 Responder

    Congrats
    We are manufacturing and exporting medical waste sterilization equipment in a very wide range
    Any demad is wellcome

Deja un comentario

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *